Our ABANDONED "Honduki" 750cc Quad Preps for a FULL SEND! Exhaust Build, Clutch Rebuild + More!
Our Honda CB750 powered Suzuki Quad Sport 230 is almost ready to hit the track! In today's episode we knock out a bunch of big items required to make this beast of a 4 wheeler run well- we build a full exhaust system including a car muffler, we refurbish the wet clutch assembly (it was sticking before and wasn't disengaging), and we mount the oil canister and battery. The Honduki is almost ready for action!

Thanks for Watching!

Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3

Go Power Sports: goo.gl/c2Tz6o

Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...

NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...

The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

  • Abbey Clapp
    Abbey Clapp


  • David Kelm
    David Kelm

    The HonDuki is awesome ! 🤓

  • Carter Brunner
    Carter Brunner

    Good footage

  • k_luv JP
    k_luv JP

    the vibe is way different then their old videos

  • Do RC
    Do RC

    If you heat up the boots with the hair dryer or heat gun it will help carburetor installation a lot.

  • Keeping It Keith
    Keeping It Keith

    He legit thought the carb job was easier than the clutch job. 😂

  • JK Lyons
    JK Lyons

    Y'all should see my zip tie Frankin bumper cover. Y'all are fine with making due with what you got. That's why this real content not scripted. That why I'm hooked because it is real life and most of us gotta make due with what we got.

  • marc provencher
    marc provencher

    Disappointing to see junk being built, sorry

  • Nicholas Duckney
    Nicholas Duckney

    “I don’t think this looks so incredibly stupid”, I nearly spat my coffee all over my laptop, some of your finest one liners appear in this video.

    • Trev Walker
      Trev Walker

      Like how you do the welding on the tyres. Trev UK.

  • Nani

    just straight pipe it

  • MrNursi

    Still think it should be the 'Sukonda' a bit like those reliable Japanese watches!

  • LukeTheJoker

    HonTurDukie? Is that like a Turduckin?

  • Tyler N
    Tyler N

    No need for the spacers just slice off the end of the bolts make them a bit smaller.

  • Mr Builds
    Mr Builds

    I’m doing a similar build but with a 2000cc winsconsin motor and a Polaris 900cc quad

  • Rusty Seesaw
    Rusty Seesaw

    QuadZilla comes to mind. Just awesome.

  • john beach
    john beach

    Hey, that fuel tank might've looked funny, but you could fab a rack and have 4 little tanks set up side by side and painted the same color. I think it might look pretty cool for an engine with 4 cylinders.

  • john beach
    john beach

    Any out takes, bloopers-n-behind the scenes coming?

  • john beach
    john beach


  • 59vaughn

    The first headers lengths were not nearly as much a debacle as that "job"....😖😜...and that car muffler is way outer limits stuff...the bullets would be spot on...

  • wippy748s

    some say one day they will actually get a carb to work properly

  • Spud James
    Spud James

    The HonDuki TerdO is what I would call it. But I would go with a plentum and a single fuel injected throttle body if you go to TerdO it. Live the duki!

  • Harry Mangus
    Harry Mangus

    I've watched all three videos, and not one single curse word! There may be hope for the world after all.

  • D B
    D B

    poor welder, all hack

  • Aaron Stewart
    Aaron Stewart

    fucking piss jugs, way of the road, bubs.

  • MagPel

    It's a myth that 4 strokes need any sort of back pressure to run optimaly. It's just restricting the flow. Don't bother with it unless you want to de-tune it to work with the stock carb jetting or for noice. I know i'm going to get people saying it's not true but it is. 2 strokes are a totaly different beast.

  • Donbot5000

    hd piss jugs reference ...lol

  • MBM game
    MBM game


  • Jeppe Christensen
    Jeppe Christensen

    Have you guys heard about the tilitson 236r??

  • Herman Wallin
    Herman Wallin

    revive the diesel kart

  • Corey Breedy
    Corey Breedy

    I have a question. Can u put a 150cc on a 110cc atv

  • Karsyn Erhard
    Karsyn Erhard

    Love the channel could literally be a legitimate garage pilot type series awesome camera quality and great commentary like "tacked in" Love the channel

  • Dipe

    It's just loud enough to disguise the exhaust leaks

  • PW

    Don’t use a Phillips screwdriver on Japanese screws. Get yourself a set of JIS (Japanese Industrial Standard) screwdrivers. You’ll be glad you did!

  • Jerry Tuley
    Jerry Tuley

    Call it turducken

  • Jerry Tuley
    Jerry Tuley

    use one of the big red tanks

  • Isaac Goplen
    Isaac Goplen

    Me and Isaac are so similar in 2 ways 1- We have the same name. 2- We are both motor heads.

  • Stefen McElravy
    Stefen McElravy

    I want to see issacs beard at duck dynasty status

  • junkinstein

    The turbo duke

  • Michael Seiber
    Michael Seiber

    John looks like a corpsman holding that bottle feeding the beast

  • Hustle Man 35
    Hustle Man 35

    Hey good evening friends I enjoy show u host I love episode so cool nice in good day and great job and bless one

  • Andy hood
    Andy hood

    Good God, put that welder down. This is cringe worthy.

  • Fantaman900

    sounds like a legit oem setup hahaha🤣

  • freakotec

    Good lord boys. This build is quickly going full on next level janky.

  • Bryan Shaw
    Bryan Shaw


  • Mr.Mister

    "Self clearing" is a technical term right? Of course it is lol

  • Arthur Beelaert
    Arthur Beelaert

    Do a honda camino vario pls

  • ThisGuyNamedMatt

    Shoulda left the tail pipe and put an exhaust flapper on cuz its "The Honduki."

  • Joe Blow
    Joe Blow

    What a complete hack job...

  • atomic V
    atomic V

    i just got my kart going ive been working on for years today. itz FFFFAAAAAAAZZZZZZZTTTTTTT.

  • Toast

    30:00 the turbo duki lmao

  • Michael lemons
    Michael lemons

    Got a ? U ever help someone out I got this lil dirt for my son and I don't no anything about it and can't get it to stay running and I can't find anyone around pa that can fix it for me I will pay

  • jlucasound

    @33:44 Ike's jacket says, "FART". Oh. Sorry. "HOBART".

  • Shayne Gadsden
    Shayne Gadsden

    9 ads in a sponsered video is extremely exessive

  • bunjit65

    Hair dryer or heat gun on the old rubber manifolds can make them pliable so you can get carby sets on again easily. It's a pain in the coit when they're old and hard as rocks.

  • bunjit65

    Before you remove 6mm bolts from old motorbike engines, try giving them a sharp tap with a hammer nice and square. This can often stop them from binding up. Even better, remove the bolt with a hand tool like a T-handle so you can feel how much torque is going on. Impact driver's are great, but can overpower a 6mm bolt that is galled up in the aluminum and break it off. They can be such a bastard to remove once they bust, I always take a lot of time to ensure they come out clean. When I put them back I use something that will stop them from binding in there like Permatex Anti-Seize Lubricant.

  • Alasdair

    Taryl has totally nailed it.. they are 'carb-you-traitors'

  • ncwarrior62

    Another good video on the books! Thank You Guys!!

  • Nic jp2
    Nic jp2

    If y’all super charge the honduki then you can call it the super honduki

  • Cory Hawkins
    Cory Hawkins

    That jacket Isaac is wearing where he colored in Hobart to say fart, now that’s just perfect 👌

  • Mr Steelhead slammer
    Mr Steelhead slammer

    What happened to the dragster

  • Bruce Grunewald
    Bruce Grunewald

    Garage shop hackery at it's finest. That exhaust is a work of art.

  • tabakatinjim

    Shitty lookin exhaust

  • Cortnie Smith
    Cortnie Smith


  • Jay Mugridge
    Jay Mugridge

    Proudly engineerd in the backyard. Sketchyness at its finest.

  • Pierangelo Quintilio
    Pierangelo Quintilio

    Horror bike🤮

  • Ognyan Dachev
    Ognyan Dachev

    Wow thats a special y-pipe :D

  • Rod MONK
    Rod MONK

    If you turbocharge it you can just change it to the Widow maker

  • Markus M. Lambers
    Markus M. Lambers

    It isn't a "Honduki", it is a "Suzuda" ! It sounds so much better, ... ! Driving myself a Suzuki and a Kawasaki, for 'car' und 'Motor-Bike'. (A 21-year old 'Jimny', and an nearly as old 'Estrella') My Kawasaki is almost called "Krawallosaki" that means it makes so much 'Krawallo" ! (Noise) And my car is my old 'Black Magic Woman', ... So take care of that special device.

  • Jonathon Jeffries
    Jonathon Jeffries

    You guys should look into getting a Hawk 250 and see what you can do to squeeze more power and speed out of it.

  • avant marable
    avant marable

    i went through the same bs with me 750 took hr just to get the carbs back on 😂😂😂 i thought i was the only one

  • enwri

    Don't split the carbies up, it's more trouble than it's worth. Take off the bowls, jets, and mixture screws. The press fit idle jets do come out, pull and twist carefully. Clean every little passage you can squirt carb cleaner through, until you see them flow the same on each carb. Don't link up the overflows either, that can mess them up too. They will never sync if they aren't all working exactly the same. If no-one has ever had the slides out, they are probably still synced properly anyway. It's not an adjustment that changes by itself. It's people messing with them puts them out.

  • Steve Deasy
    Steve Deasy

    F SVname algorithm

  • John Clair
    John Clair

    I have been watching you guys for ever, please, both of you guys get a real quad and ride!

  • bospimpphand

    a little oil will make those carbs slide right on

  • Incognito Bandito
    Incognito Bandito

    NOT a phllips screw!!! it's JIS

  • Mitch Lec
    Mitch Lec

    Never hit a cover with a metal hammer, use a rubber mallet to not crack the cover. Never reuse an old gasket either. C-mon Isac, you used to rebuild engines...

  • Jeff Perrault
    Jeff Perrault

    With open air filters and an exhaust that isnt real restricted you are going to have to go way up on the main jet..literally like ten steps as a starting point..

  • Suffer Nofools
    Suffer Nofools

    Also, the fact that the motor is tilted about 20° too far forward, is NOT helping your clutch issues. It's not getting enough oil on the clutches tilted that far forward.

  • Suffer Nofools
    Suffer Nofools

    I would've thought that by now you guys would know that if you're not synchronizing those carbs after cleaning/rebuilding, that you're completely wasting your time....

  • Donavan Roland
    Donavan Roland

    If you are going to use a car muffler it should be a cherry bomb.

  • Dreaming Big Customs
    Dreaming Big Customs

    Gotta say I don't think I've ever seen anyone install carbs with a rachet strap until now 😂

  • Fred Van
    Fred Van

    I was told the thickness of a dollar bill

    • Fred Van
      Fred Van

      On the points

  • TnT Productions
    TnT Productions

    TOO MANY ADS!!! Y'all ain't had this many in the past... c'mon guys

  • Kylee Kyotee
    Kylee Kyotee

    Yes to the turbo and call it the honturdski lol

  • rararawr619

    Petition to refer to it as Hondiarrhea if you ever turbo it

  • Justin Prentice
    Justin Prentice

    Still waiting for the 919 crosskart 2.0

  • Francisco Arellano
    Francisco Arellano

    8pm but what time zone?

  • 4bangerlove

    It always sounds like your weld wire speed is too slow. Just saying

  • Alex Pichardo
    Alex Pichardo

    You gotta link up with 2vintage and do a race for a video colab

  • Jay Gorveatte
    Jay Gorveatte

    I'm going to assume that you are aware that a vintage japanese bike uses jis screws not Philips. If you don't have proper japanese industrial screwdriver set invest a couple of dollars in them. Lots of them online.

  • cafn8ed74

    Dookie. Can't wait to see how it rips.

  • tritowns

    JIS, not phillips

  • levi doane
    levi doane

    10:13 is the most crisp high-five ever

  • Marshall Mathers
    Marshall Mathers

    Please name it quadzilla

  • Danny Pratt
    Danny Pratt

    Do we actually get to hear the real sound and not it in its ear rape mode?

  • Senyum Selalu
    Senyum Selalu

    B.e.S.T f'u"l'l D.a.T.i.n.G -L-o-V-e-S-e-X-----۞------------ 18cams.xyz 》》 𝙊𝙣𝙡𝙮 𝘼𝙙𝙪𝙡𝙩 《《 !❤️ 在整個人類歷史上,強者,富人和具有狡猾特質的人捕食部落,氏族,城鎮,城市和鄉村中的弱者,無`'守和貧窮成員。然而,人類的生存意願迫使那些被拒絕,被剝奪或摧毀的基本需求的人們找到了一種生活方式,並繼續將其DNA融入不斷發展的人類社會。 說到食物,不要以為那些被拒絕的人只吃垃圾。相反,他們學會了在被忽視的肉類和蔬菜中尋找營養。他們學會了清潔,切塊,調味和慢燉慢燉的野菜和肉類,在食品市場上被忽略的部分家用蔬菜和肉類,並且學會了使用芳香的木煙(如山核桃,山核桃和豆科灌木 來調味食物煮的時候 1617305737

  • Joshua Foster
    Joshua Foster

    Lol, cut a small hole in the rear muffler

  • John Babb
    John Babb

    Three ads in the first 18:30! And they were the same ads!! I just unsubscribed. Sayonara.

  • Joe Mollet
    Joe Mollet

    That engine looks very familiar. Like the one that’s in my 78 Honda CB750K Four. Hmmm

  • Mathias Schäfer
    Mathias Schäfer

    Yeah... 10 adds in 1 video... lovely... and there goes the fun of watching...